808 nm / 3 W / ST Packaged LPC laser power converter

FS-LPC-808-003W-ST

Converts incident laser energy into DC electricity. Select the configuration against the optical interface, input conditions, load and heat sinking.

808 nm / 3 W / ST Packaged LPC laser power converter — Photograph of the reference configuration
Photograph of the reference configuration

Parameters

Reference designationFS-LPC-808-003W-ST
Input wavelength800–840 nm
Typical operating points3.21 W @ 6 W optical input / 6.1 V / 0.526 A
Maximum optical input (adequate cooling required)8 W
Operating case temperature−40…+85 °C

Applications & selection

Isolated power for industrial sensors; high-voltage equipment monitoring; remote electronics in high-EMI environments.

For enquiries: wavelength, optical power at the receiver, fiber connector or beam profile, target output, heat sinking and quantity.

Typical operating points

Operating points and curves: nominal wavelength, 25°C case temperature. Optical input is power at the receiver, not transmitter output or end-to-end electrical output.

Optical input / WElectrical Pmpp / WVmpp / VImpp / A
10.586.40.091
31.726.30.273
52.746.10.452
63.216.10.526
Absolute maximum ratings / Fiber specifications

Absolute maximum ratings

ParameterSymbolMin.Typ.Max.Unit
Storage temperatureTS−402585°C
Operating case temperatureTC−40—85°C
Relative humidityRH5—85%
Maximum optical input powerPopt IN——8W

Fiber specifications

ParameterSymbolMin.Typ.Max.Unit
Fiber core diameterD—40–400 (reference range)—μm
Numerical apertureNA0.170.220.22—
Fiber length——Application-specific—m

Pins & electrical interface

1Output +
2GND (housing)
3Output −
4NC (not connected)

Images and pin assignments describe this reference configuration; other electrical interfaces or packages require separate confirmation.

Dimensions & mounting

Dimensions in mm; reference drawing. Confirm the latest engineering drawing before delivery.

Reference values support selection. Confirm final configuration and acceptance conditions in the technical agreement. A power class is not guaranteed output under every operating condition.

marketing@fullsuns.com

Related receivers