808 nm / 100 W Fiber-coupled semiconductor laser
FS-LASER-808NM-100W
Select by wavelength, optical output, fiber and cooling. Laser optical output is not LPC receiver electrical output.


Parameters
| Center wavelength | 808 nm |
|---|---|
| Output power class | 100 W |
| Operating voltage | 21.6 V |
| Operating current | 10 A |
Optoelectronic test condition: 25°C water temperature. Operating-temperature limits are listed separately.
Applications & selection
PoF transmitters, source matching and laboratory platforms. Confirm wavelength, interface, driver, cooling and safety interlocks.
Pins & electrical interface
| Pin | Function | |
|---|---|---|
| 1 | LD+ | |
| 2 | LD- | |
| 3 | - | |
| 4 | - | |
| 5 | NTC | NTC |
| 6 | - | - |
| 7 | - | - |
Optoelectronic parameters
| Parameter | Unit | Typ. | Max. |
|---|---|---|---|
| Center wavelength | nm | 808 | — |
| Output power class | W | 100 | — |
| Threshold current | A | 1.73 | 1.8 |
| Operating voltage | V | 21.6 | 22.2 |
| Operating current | A | 10 | 12 |
| Slope efficiency | W/A | 12 | — |
| Electrical-to-optical efficiency | % | 46 | — |
Fiber specifications
| Parameter | Unit | Value |
|---|---|---|
| Fiber core diameter | μm | 200 |
| Fiber numerical aperture | - | 0.22 |
| Fiber length | m | - |
| Optical fiber interface | - | SMA905 |
Environment & mounting
| Parameter | Unit | Min. | Typ. | Max. |
|---|---|---|---|---|
| Operating temperature | °C | 15 | 25 | 35 |
| Storage temperature | °C | -20 | — | 50 |
| Humidity | % | <70% at 25°C | ||
| Cooling options | - | Conduction cooling | ||
| Pin soldering time | s | <10 | ||
| Soldering temperature | °C | <280 |
Dimensions & mounting
Reference values support selection. Confirm final configuration and acceptance conditions in the technical agreement. A power class is not guaranteed output under every operating condition.
