Select the source for receiver wavelength and optical interface; review optical output, control, coupling and cooling separately.
Match receiver wavelength, optical interface and optical power.
Fiber-coupled laser. The published datasheet specifies tests at 25°C water temperature: 105 μm fiber, NA 0.22, SMA905 and 1.5 m standard length. Confirm cooling and version in the technical agreement.
Confirm input conditions, interfaces, cooling and configuration for the project.
Liquid-cooled configurations; wavelength and 1–4 channels depend on version. Confirm power allocation, optical interfaces and safety interlocks.
20 W is the typical laser optical output, not the electrical output of an LPC receiver. System selection must account for fiber and connector compatibility, transmission losses, cooling and receiver operating conditions.
Datasheet test condition: water temperature 25°C. A dash indicates a value not specified in the source specification.
| Parameter | Minimum | Typical | Maximum |
|---|---|---|---|
| Center wavelength | 803 nm | 808 nm | 813 nm |
| Optical output power | - | 20 W | - |
| Threshold current | - | 1.3 A | - |
| Operating voltage | - | 3.4 V | - |
| Operating current | - | 12 A | 14 A |
In the view with two leads on the left, the upper lead is pin 1 (LD−) and the lower lead is pin 2 (LD+). Mounting holes: 3 × Ø3.50 mm through-holes.
FULLSUNS English PDF · 3 pages · Specifications, dimensions and pinout
Share the application, wavelength or input supply, optical/electrical requirements, receiving area or load, cooling and quantity. Unknown inputs may remain open for technical review.
Request Selection Support