808 nm / 600 mW / 1.8 × 1.8 mm Bare LPC die

FS-LPC-808NM-600MW-DIE

Select the cell or assembly by wavelength, illuminated area, electrical output and cooling. Wavelength variants are separate configurations.

808 nm / 600 mW / 1.8 × 1.8 mm Bare LPC die — Photograph of the reference assembly
Photograph of the reference assembly

Parameters

Input wavelength800–840 nm (808 nm)
Die outline1.8 × 1.8 mm
Thickness200 µm
Maximum optical input (adequate cooling required)1.2 W

The 1.5 W optical-input curve exceeds the listed 1.2 W absolute maximum. It is a reference test record, not an allowed operating range; confirm the rating before delivery.

Applications & selection

LPC receiver integration, beam-to-cell matching, packaging and thermal assessment.

Dimensions & mounting

ItemSpecification
Die outline1.8 × 1.8 mm
Thickness200 μm
Top-side pads4
Top pad gold thickness0.4 μm
Bottom gold thickness0.4 μm

Pins & electrical interface

SurfaceOutput polarity
Top sideNegative (−)
Bottom sidePositive (+)

Absolute maximum ratings

ParameterSymbolMin.Typ.Max.Unit
Storage temperatureTS−402585°C
Operating case temperatureTC−40—85°C
Maximum optical input powerPopt IN——1.2W

Input wavelength

ParameterSymbolMin.Typ.Max.Unit
Recommended input wavelengthλ IN800808840nm

Typical operating points

Optical input (W)Pmpp (W)Vmpp (V)Impp (A)
0.50.2746.080.045
1.00.5786.080.095

Dimensions & mounting

Reference values support selection. Confirm final configuration and acceptance conditions in the technical agreement. A power class is not guaranteed output under every operating condition.

marketing@fullsuns.com